SGY-PM910HR
A new generation of power meter to support athletes who want to go farther and faster. The single type Pedaling Monitor Sensor. This sensor can combine with the ANT+™ Cycle Computer for precise power measurement.Additionally, the device can be combined with the SGX-CA500 Cycle Computer* to measure torque and produce pedaling vectors for every pulse, allowing you to see your skills in specific detail
* ANT+™ is a low-powered wireless communications standard using the 2.4GHz range.
* Requires changes to usage mode according to objective.
“Power” & “Pedaling” training debuts on single types for added convenience
Combine with a Cycle Computer that supports your ANT+™ to use as a precision power meter.
The device can be used for a wide variety of training, realizing the dreams of cyclists to go farther and faster than ever before.
The device can be used for a wide variety of training, realizing the dreams of cyclists to go farther and faster than ever before.
SGY-PM910HL Left crank use
Easy changing of crank placementaccommodates the goals of athletes
looking to train or race.
SGY-PM910HR Right crank use
The device supports a wide variety of bike models,with minimal influence from brakes or frame shape.
The cover comes in two standard colors: metallic red or metallic grey.
The color can be switched to match your preferences
and the color of your bike.
With the SGY-P910HL and SGY-PM910HR, the Ant+™ compatible Cycle Computer
can display total power, and measure left and right power
independently.
Display pedaling data alongside power measurements with the SGX-CA500, SGY-PM910HR, or the SGY-PM910HL.
Display left and right pedaling data alongside left and right independent power measurements with the SGX-CA500, SGY-PM910HR and the SGY-PM910HL.
Specifications
- World's first* high-precision measurement of force magnitude and force direction, every 30° of rotation, for each leg
- Supports SHIMANO FC-9000 and FC-6800 cranksets
- Improved support for various cycle frames, with thin-profile sensors and two types of rotation detector magnets
- Right-hand side transmitter cover included in metallic red and metallic gray finishes, to suit your style and frame color
- Simple maintenance operations for zero point calibration, battery replacement, and more
| Weight | About 40 g |
|---|---|
| External dimensions | [Pedaling monitor sensor (right side)] ・Righttransmitter: 58.3 mm(W) × 46.1 mm(H) × 21.3 mm(D) ・Junctionbox,Straingaugeunitcover: 78 mm(W) × 36.7 mm(H) × 7.3mm(D) |
| Water-resistance | This device has a water resistance rating of IPX-6/IPX-7 |
| Communications system (sensors) |
ANT+™ *1 standard |
| Battery | CR2032 |
| Battery operating time *2 | Approximately 180 hours (normal temperature) |
| Guaranteed operational temperature range |
-10 to 50°C |
| Accessories | Instruction manual, warranty, battery (CR2032)(equipped to sensor), right transmitter cover (metallic gray), hexagonal screw (M2.6 x 8MM)x 3 (3 extra for use with right transmitter cover), ties x4 (for use with right magnet x 2, 2 extra), cushion for arm type magnet attachment, patch type magnet base, tape for use with chain ring adaptor, tape for use with FC-6800 adaptor base |
| Implemented crank | SHIMANO FC-9000 , SHIMANO FC-6800 |
*1 ANT+™ is a low-powered wireless communications standard using the 2.4GHz range.
*2 The battery operating time may decrease depending on the operating conditions.
• Specifications and design are subject to change without notice.
*2 The battery operating time may decrease depending on the operating conditions.
• Specifications and design are subject to change without notice.
Options
| SGY-MG910P Patch type magnet (two) with cushion | |
| SGY-MG910A Arm type magnet (one each for left and right) | |
| SGY-RC910-MR Right transmitter cover metallic red | |
| SGY-RC910-MH Right transmitter cover metallic gray | |
| SGY-AD910 Chain ring adaptor |
