A-50DA
Pure Audio Full Amplifier/Converter with 2x90 Watts, Phono and asynchronous USB Digital Input
Open to all possibilities
The A-50DA is open to all current end music formats Its high-grade
phono input deals with the signals from record players, while four
golden cinch inputs are ready for all types of Players. Digital formats
are dealt with by a highly modern D/A converter based on the ESS SABRE
Ultra. Via asynchronous USB transfer this converter also supports
ultra-high-resolution material with 32 bit and up to a sampling rate of
384 kHz, as well as native DSD with up to four times the rate (11.2
MHz). The switch output stages in the A-50DA specially developed for use
with music supply 90 watts per channel; a mains transformer of large
dimensions with separate windings for the power amplifier, pre-amplifier
and controls ensure a stable feed, including with highly-dynamic
encoded material. A thick aluminium front panel, metal knobs, massive
screw terminals and, last but not least, a high-grade remote control
ensure that everyday use of the A-50DA will provide as much enjoyment as
its sound.
Connectez votre ordinateur directement à l’entrée asynchrone USB. Le
transformateur D/A ESS ES9016S intégré traite les signaux lui-même avec
la plus haute résolution possible, comme Quad-DSD avec jusqu’à 11,2 MHz
et les fichiers PCM dans le format WAV ou FLAC avec jusqu’à 384 kHz et
32 bit.
The highly-efficient MOSFET Class D amplifier supplies 90 watts per
channel and facilitates extremely dynamic, detailed and precise sound
reproduction.
Connect
your record player very easily to the phono input using an MM or MC
system and enjoy your vinyl collection in the best quality.
Audio Features
- 90 W + 90 W (20 Hz-20 kHz, THD 0.5 %, 4 ohms)
- 65 W + 65 W (20 Hz-20 kHz, THD 0.5 %, 8 ohms)
- THD: 0.02 % (Rated Output -3 dB, 8 ohms, 1 kHz)
- Guaranteed Speaker Impedance: 4-16 ohms (A or B), 8-32 ohms (A+B), 4-16 ohms (Bi-Wiring)
- Frequency Response (Measured with DIRECT button switched on): SACD/CD, NETWORK, LINE1, LINE2 5 Hz-50 kHz, ±3 dB
- RIAA Deviation: PHONO MM 20 Hz-20 kHz, ±0.5 dB
- Signal-to-Noise Ratio (IHF, A Network, Short Circuited)
SACD/CD: 101 dB, Phono: 89 dB (MM: 5 mV input)
Power Amp Direct: 110 dB - Channel Separation
SACD/CD: 90 dB (100 Hz), 84 dB (1 kHz), 75 dB (10 kHz)
Power Amp Direct: 95 dB (100 Hz), 95 dB (1 kHz), 80 dB (10 kHz) - Pure Audio Grade High Efficiency Power ›› MOSFET Amplifier (Class D Amplifier)
- Separated Construction for Preamp and Power Amp
- Isolated Power Supply
- Source Direct Mode
- Highly Acclaimed ESS SABRE32 Ultra DAC
- 384 kHz/32-bit USB-DAC for Asynchronous Transfer
- Trans-Stabilizer
- Speaker A, B, A+B Selector
Operating Features
- Aluminium Front Panel and Rotary Knob
- Auto Power Down
- Hair Line Finish Remote Controller
Connections
- Exclusive Gold-Plated Speaker Terminals (Large Type)
- Gold-Plated Analogue Audio Input (Phono MM, CD, LINE 1, LINE 2, NETWORK, USB, COAXIAL, POWER AMP DIRECT IN)
- USB Input for Asynchronous Transmission
- Digital Coaxial Input
- Digital Optical Input
- Audio Output (LINE 2, PHONES)
- SR In/Out
- AC Inlet (Large Type)
Dimensions & Weight
- Dimensions (W x H x D): 435 x 138.5 x 357 mm
- Weight: 11.2 kg.
